Showing posts with label wildlife in the garden. Show all posts
Showing posts with label wildlife in the garden. Show all posts

Two Insect Hotels & Bug Houses Designed and Made from Repurposed Materials - The Gite & The Chalet

There are so many fascinating insects living in a garden and they need both places to overwinter and somewhere to lay eggs in warmer months.

Shield bug on a passionflower leaf

Many gardeners are fastidious in clearing away rotted wood, fallen branches, piles of leaves and herbaceous stems. This debris however, offers sought-after accommodation to a whole raft of arthropods, many of whom have kept the garden pest-free, as well as pollinating fruits and vegetables.

European Black Bee

In order to compromise therefore, it is necessary to offer alternative accommodation. This is however not the whole story. Continued use of pesticides has severely depleted insect populations, so if you can offer a haven for them within you own garden, then you are also doing your bit to preserve the biodiversity and counteract the harm being done elsewhere

The following blog post offers two of our more simple designs, whereas the following article will share some of our more elaborate insect homes. These are all made from repurposed materials, untreated pallet wood, fruit crate wood and general garden debris. To decorate them, we use natural earth and mineral pigments, made, as the name suggests, from clays and semi-precious stones. Our article using natural pigments should help you, if you have never used them before.

The Gîte


Simple Mason Bee House

This is one of the simplest form of solitary bee and lacewing houses, two types of insect who offer so much to the gardener. There are over 200 species of the former, one such, the Harebell bee is so small it can fit inside a wheat-straw stalk and often uses a disused woodworm burrow. When the bees find the accommodation to their liking they will stay throughout the year, using the hole as a nursery, making it the basis of an expanding colony for the garden. This is of great advantage, as it is the solitary bee, which does most of the task of pollinating our food crops. The recommended diameter of burrow to attract these bees is from 2-10 mm. You can achieve this by simply collecting suitable sized hollow stalks or you can do as we did above and drill out some of your old prunings, in our case; buddleia. The lacewing, a delicate and beautiful creature is a wonderful gardener's helper, with many of the species having a voracious appetite for aphids. This sort of accommodation can be sited anywhere you find a suitable opening but in order to attract the insects initially it is a good idea to site it where there are melliferous flowers

The Chalet


Simple insect house design

This is a nice little project and where you can use natural pigments to create some really harmonious designs as well as useful insect accommodation. They also make great gifts and can be either suspended or attached directly to walls or fences.

Mason bee house design in pallet woodMason Bee House from pallet wood block

The chalets are made from pallet wood blocks with a piece of pallet wood planking for the backing board. They also have roof shingles cut from fruit crate wood. The roof shingles can be attached either with 15mm panel pins or, if you have it, a mechanical or electric stapler. The most difficult part is drilling the pallet wood block. I used 6 and 10mm drill bit.



If you are thinking of this as a project for a child, it could be given in kit form, even as a gift, for self-assembly and the opportunity to get creative in personal choice of decoration. From experience it is better to varnish or oil each individual element before the final assembly. You can have great fun mixing and matching the pigments and apart from being great gifts, these insect homes can make useful little items for a fund raising event or, who knows, the start of a whole new career! 

Bug house for hanging in trees
Simple Insect Hotel in use

Truly the gift that keeps on giving, when we were wrapping up one of these as a birthday present, we noticed that one of the chambers was already occupied! It also makes a fascinating study to just sit and watch who comes to check out the accommodation. On the right, you can see that two holes have already been sealed. If you have leaf cutter bees, then they make for compulsive viewing.


Here is our detailed film on how to make the chalet:



A following post will share two more designs for insect hotels, again made from repurposed freely available materials, so until then, thanks for dropping by!Please feel free to share this article, comment and/or ask for further information.

All the best, Andy

© Andy Colley 2014

RELATED ARTICLES

Home-made Insect Hotel from Repurposed Materials

The Bee Cosy for cosy bees is an elegant green gift for you to make using 99% recuperated materials...read more
 


Home-made Repurposed Wood, Luxury Insect Hotel

Fun to make and fascinating to watch, these insect hotels can make all the difference to the successful pollination of your fruit and vegetable...read more



An Insect Hotel as a Utility Box Cover - Design & Construction

The electricity company brought power to the property but sited the ubiquitous supply box right in front of the house. Not surprisingly, she is unhappy...read more


DIY Bird Box for Robins, Wrens, Pied Wagtails, Eastern Bluebirds, Northern Flickers and Purple Martins.

Spring is the time when birds begin to look for good nesting sites. They may try many possibilities and even actually start the makings of a nest before they actually make their final choice. You can help them and attract many of these birds to your garden by providing them with a good choice of homes. In the last blog we looked at one design to attract a specific group. Now I'm going to proffer this design to attract some others. Over the decades the natural nesting sites, cracks in old buildings and garden walls and shakes in ancient trees, have become rarer. Our aim is also to create something which would blend into the background to attract these often shy birds.




As a rule, in Europe these boxes are expected to attract mainly robins, wrens and wagtails. In the USA there are over 50 species who prefer to use an open-fronted cavity nest. However, wherever you live you should research the individual habits and volumes needed for any specific  bird. Martins, for example, prefer to nest in colonies so you should provide either 5 or 6 boxes placed closely together or one large box with separate nesting chambers. Blackbirds may also use this type of box but would need it to be enlarged by around 50%.




The materials and construction are the same as for our previous box but I will repeat them here in case you have not read the post. If you have, then please continue down the page until you come to the section on the positioning of the front planks.


Materials


The box is based on the same design as my Apple House but is formed around a larger 140 mm - 5½" pallet block. You will need 1 or 2, 100 mm - 4" wide pallet wood planks and the wood strips from a fruit crate or orange box. We decorated it with water-based acrylic varnish and tinted it with earth and mineral pigments. For information on mixing these: http://thegreenlever.blogspot.fr/2012/02/using-natural-earth-and-mineral.html

Construction


 




For the four sides, mark out the first length, which corresponds to the length of the block plus plank thickness. Cut four sides to this length.


 





Pre-nail the planks, if the wood splits at this juncture, then drill a pilot hole at a slightly smaller diameter than the nail shank and then nail. 














Position and nail front.

 


 

Cut base to make a platform suitable for nest building, 100 mm x 100 mm - 4" x 4" and mitred at 45°. 






 
 
Mark the position of the shelf from the inside.





 

Drill pilot hole and screw the shelf in position.




 


Trim the edges. 











You now have something which looks like this.

 







 

Select wood for back of box and trace round the box as a guide for drilling pilot holes for nailing the back and screwing in the shelf.

 
  
 
Nail back wall and screw shelf into place.





Trim




Drill pilot holes for wall mounting box at bottom...



...and top.







 

Drill a drainage hole. This is very important with an open-fronted design.





 



Cut fruit crate wood to length to make shingles. Due to the open aspect, these should project well over the front of the box to protect it from rain, sun and to give more privacy.



 




 
To finish, we use earth and mineral paints and acrylic water-based varnish... 







...with a design which mimicked the golden hearted ivy growing on the wall where we were going to site it. 

We made another to fit snugly under the eaves of the pallet wood hen house.



Now, if you'd like to, sit back and enjoy he film.




The previous post has another nesting box - a design for blue tits, chickadees and pied fly catchers

Thanks for dropping by and please feel free to share this article, comment, ask questions and if you'd like to be assured of getting the next post, then sign up to follow this blog.

All the best, Andy

© Andy Colley 2014

DIY Nesting Box for Blue Tits, Chickadees, Pied Fly Catchers, Sparrows and Nuthatches.

It's Spring and the birds are still out looking for nest sites, which over the past decades have dwindled. You can help them and attract them to your garden by providing them with a suitable desirable residence. The example below is a simple design, requiring a minimum of tools and in particular to obviate the need for a hole saw or large bit.


Home-made repurposed wood wild bird nesting box

Natural nesting sites do not come with standard size front doors but for the above 'hole-in-the-front' design, there is a general rule of thumb, with some examples, given below. It is interesting that of the two bird boxes we gave as presents last year, one had an exact  25 mm round hole and the blue tits spent a couple of days enlarging the opening before they used it. Whilst the other box, at a location, some 10 miles away from the former was of the above design and was used without problem. However, making the box of pine means it is easy to modify with a beak and why shouldn't birds, like most of us, enjoy personalising their own home.

Home-made nesting box for wild birds

This one has a round entrance but is harder to make than the above design as it requires a large boring bit. Both the designs were recently given as Birthday presents and I'm happy to say all have tenants!

25 mm - 1" for blue, coal and marsh tits and chickadees.
28 mm - 1 1/8" for great tits, tree sparrows and pied flycatchers 
32 mm - 1¼" house sparrows, tree swallows and nuthatches
45 mm - 1¾" starlings
150 mm x 150 mm - 6" x 6" for the barn owl box I am in the process of making

Materials


Wild bird feeder home-made from repurposed woodThe box is based on the same design as my Apple House but is formed around a larger 140 mm - 5½" pallet block. You will need 1 or 2, 100 mm - 4" wide pallet wood planks and the wood strips from a fruit crate or orange box. We decorated it with water-based acrylic varnish and tinted it with earth and mineral pigments. For information on mixing these: http://thegreenlever.blogspot.fr/2012/02/using-natural-earth-and-mineral.html   

Construction


 




For the four sides, mark out the first length, which corresponds to the length of the block plus plank thickness. Cut four sides to this length.


 





Pre-nail the planks, if the wood splits at this juncture, then drill a pilot hole at a slightly smaller diameter than the nail shank and then nail. 

 

 
Cut base to make a platform suitable for nest building, 100 mm x 100 mm - 4" x 4" and mitred at 45°. 

Position and nail front.






 



Put each plank in place and from the back draw the outline of the frame and use that as a guide for the pilot holes to avoid splitting the wood.





 



 
Trim the edges. 









 

With the shelf in place, mark its position from the inside. This will enable the correct location for the retaining screw. Drill and screw in place.



 
 

Select planks for the rear of the box. It is a good idea to screw these into place in case you need to clean out the box after use. 

The centre piece is put on first so that the correct position for the screw holding the shelf from the back can be easily located.





 

Mark out the outline of the box onto the remaining planks.

Drill screw holes.



 




Screw to the back. Trim the top with a generous border. This allows for mounting holes for screws and nails.



Cut lengths of fruitcrate wood to make shingles for the roof. Attach to roof with staples or panel pins. 

 
You can finish with a coat of linseed/hemp oil or acrylic water-based varnish.



To create an illusion of the box being a natural nesting site, we decorated ours with the same climbing ivy as was growing in the place we intended positioning our box.





Now if you'd like to, sit back and watch the film. 



Next post will be a design for an open-fronted box, suitable for Robins, Wrens, Eastern Bluebirds, Northern Flickers, and Purple Martins.


Thanks for dropping by and please feel free to share this article, comment, ask questions and if you'd like to be assured of getting the next post, then sign up to follow this blog.

All the best, Andy

© Andy Colley 2014

 

Home-made Repurposed Wood, Luxury Insect Hotel or Five Star Bug House for the Discerning Arthropod

Fun to make and fascinating to watch, these insect hotels can make all the difference to the successful pollination of your fruit and vegetables and also to the control of pests by insect predators.

Luxuty do it yourself insect hotel

Open for Business - Build Your Own Green Hotel

Here's our deluxe version and in the next post I will be featuring our designs for 'Eco Lodges' smaller hanging and nestling accommodation you can place around the garden or orchard. They also make great presents, not only for Christmas but also in this larger form an ideal Wedding Gift. 


Insect hotel filling up
Here is a close up of what an occupied room looks like - in this case the 'door' is closed with clay but some creatures like the leaf cutter bee.. yes it's all in the name! 

Larger arthropods we find in our garden and have photographed, can overwinter in the larger stems and or bark and leaf infill. 
 

Stag Beetle


Some of these like the larvae of the Stag Beetle are becoming ever more rare, so providing them with a permanent shelter is a great idea. The larger stems will also be able to accommodate the beautiful large European Black solitary bee, again another species, who is threatened by extinction.
European Black Bee Insect Hotel

This is a great project to do with kids as there is a massive selection of differing natural materials to be sought from within the garden or further afield in woods and hedgerows. The end result can be quite artistic the only limit is your imagination. Children also enjoy seeing who is using the Hotel and can observe the essential role insects play in nature, for pollination and pest control.

materials to make a luxury insect house



Some of the materials we found for the Hotel, dried teazle heads, fir cones, dry branches, various dry flower and vegetable stems, dry bamboo canes and leaves, moss and lichens and of course pallet blocks.





Making the Hotel Frame


The structure is a rectangular frame with shelves within surmounted with a triangular apex. It is simply nailed together, including the rear wall of tongue and groove planking, which ensures that the hotel remains square and rigid.




I selected 100mm (4") wide untreated pallet wood planks.

The bottom, top and shelves were cut 50cm long. The two vertical sides were cut  50 cm plus twice the plank thickness.





The vertical sides are nailed into the end-grain of the top and bottom pieces and to ensure that the nails do not split the wood this close to the edge, I drilled pilot holes for them.






I used a 2mm drill for the holes, the nails are 2.4mm in diameter.










When nailing the sides I made sure that the rear edges of the planks were level with each other.......










.......and the corners remain square.








I used pallet blocks (pre-drilled for use in the Hotel in this image) to set the distance between each shelf. I found it easier to drive the nails into the end grain of the shelf if I once again drilled pilot holes at the appropriate positions in the vertical side walls.





If you want to put a vertical divider in an area then cut it to length and nail it to the shelf before the shelf is nailed in place. the free end of this divider may then be nailed to the top plank. You can see this in the image at the start of this post.





The triangular section at the top of the structure has a 90° angle at its apex. I initially had cut a 45° angle where it met the edge of the vertical side but I thought this was unnecessarily difficult so I just cut a square edge as illustrated. I found there was no structural difference in doing this and as the wire mesh on the front face was held in place with quarter-round beading this joint was hidden from view.







I had marked a centre line in the top of the rectangle and used a try-square from this line to determine the lengths for the two angled pieces.











Once again, pilot holes for the nails were drilled. Notice that the drill is vertical to the face of the sloping piece of wood.











When the Hotel is filled with the 'bedding materials', the exposed portions of nails are hidden from view.









The rear wall can now be cut to size and nailed in place. I used tongue & groove panelling 10mm thick. I marked the length and shape of the piece and nailed each one in place before marking and cutting the next one. Pilot holes were drilled and the back wall was nailed to each shelf as well as the rectangular frame and the triangular top.




This, ensured the whole structure was rigid and the, potentially, weak points (where nails were entering the end grain or going in at an angle) were reinforced.










And this is how it looks.










Fitting out your hotel rooms


 


Now comes the fun bit, filling the Hotel with suitable nesting materials. I used the pallet block as a guide for cutting twigs and branches to length. The 'compartments' between the pallet blocks were filled with an assortment of natural materials as well as these cut stems. 





I cleared the pith out of some stems (like the elderberry) with a stiff piece of wire. Some stems were left with the pith as certain insects eat the pith and/or use it to create doors to seal the rooms.








For the twigs, branches, and pallet blocks I drilled holes of between 4mm and 10mm diameter. 

Before everything was put in place, straw was packed along the whole back wall of the hotel to provide insulation and extra bedding.

DIY Luxury Bug House






All of this was done with the Hotel laying flat on its back. 

Once filled, chicken wire was cut to size and secured with quarter round beading nailed to the front edges of the structure. I used 30mm long panel pins to do this.


Make your own Luxury insect hotel





A nail punch was used to drive the panel pins' heads flush with the wood surface.







Siting your Hotel


DIY Luxuty Insect Hotel

Your Hotel once completed should be sited in a sheltered location and preferably in a South Easterly to South Westerly facing direction. This house is meant to be placed at ground level or hung on a wall. In the next blog I will show how to make the smaller Eco Lodges, motels, chalets and gîtes we designed for placing around the garden, on a balcony and/or hanging in trees. 



Beware once made, these insect hotels make addictive watching, people have been known to spend hours observing insects coming in and out of their hotels! Have fun and now, if you'd like to, sit back and watch the film.
 



For a smaller insect hotel project see our blog post on The Bee Cosy for cosy bees!


Thanks for dropping by and please feel free to share this article, comment, ask questions and if you'd like to be assured of getting the next post, then sign up to follow this blog.

All the best, Andy

© Andy Colley 2014

RELATED ARTICLES 

Home-made Insect Hotel from Repurposed Materials

The Bee Cosy for cosy bees is an elegant green gift for you to make using 99% recuperated materials...read more

Home-made Insect Hotels from Repurposed Materials The Gite & The Chalet

Made from repurposed materials, untreated pallet wood, fruit crate wood and general garden debris. To decorate them, we use natural...read more

An Insect Hotel as a Utility Box Cover - Design & Construction

The electricity company brought power to the property but sited the ubiquitous supply box right in front of the house. Not surprisingly, she is unhappy...read more

An Insect Hotel as a Utility Box Cover - Roofing & Furnishing

The roof was constructed in a similar fashion to that of a house. The pitch was 45°. The gable ends supported the ridge purlins/laths...read more


An Insect Hotel as a Utility Box Cover - Installing

Having made the insect hotel, its roof and metal posts in 'kit' form as it were,it was time to transport it and put it in place...read more